Timing Belt – GT2 (3mm), 89 grooves, 269mm pitch length, 9mm wide This 9mm wide belt is a spare for our NEMA 34 rack and pinion drive. The belts on the system should last a while, but eventually will need replacing. This spare belt gives you peace of mind that the machine will be back up […]
Motor pulleys for use with our Rack and Pinion Systems. NEMA 23 Pulleys – GT2 3mm 20 tooth for motors with a 1/4in Shaft 20 tooth for motors with a 3/8in Shaft and a 3mm Keyway NEMA 34 Pulleys – GT2 5mm 20 tooth for motors with a 1/2in Shaft and a 5mm Keyway
2 flute, carbide tipped. Will plunge cut. 60° V-Groove bits are used for cutting 60° V grooves, 30° chamfers or a 30° angle for an accurate mitre. Excellent for sign carving, lettering, grooving, etc. Degree: 60° Large Diameter (Inch): 1/2 Carbide Height (Inch): 3/4 Number of Flutes: 2 Material: Solid Carbide Shank Diameter (Inch): 1/4 […]
These sign lettering bits are 60° V-Groove Plunge Bits and have a flat bottom. They are designed for freehand or CNC lettering. Maximum groove width is 1/2”. Degree: 60° Large Diameter (Inch): 9/16 Carbide Height (Inch): 9/16 Number of Flutes: 2 Material: Solid Carbide Shank Diameter (Inch): 1/4 Applications: Wood
All 3 bits are top quality Solid Carbide cutters. 2 flutes, carbide tipped. Will plunge cut. Use your V-Groove bits for are used for cutting full V grooves, chamfers, or an angle for an accurate miter. Excellent for sign carving, lettering, grooving, etc. Ideal for soft & hardwoods, plywoods & composites, and laminates. Set Includes […]
1 or 2 flute, carbide tipped. Works well in soft or hard woods as well as composition materials. Can be used for reeding, fluting, veining, grooving and general ornamentation where a round bottom groove is desired. Large Diameter (Inch): 1/8 Carbide Height (Inch): 5/16 Number of Flutes: 1 Material: Solid Carbide Shank Diameter (Inch): 1/4 […]
All four bits are top quality HSS Onsrud cutters. 2 flute flat bottom cutters. Will cut faster, smoother, and stays sharper longer. Produces a very clean, fast, and accurate cut with minimal chatter. Upcut spiral helps remove material and will give a clean edge on the bottom of the cut. Downcut spiral helps hold the […]
This spindle mount will hold any air and water cooled spindle with a 80mm body diameter. Made from a single block of billet aluminum to increase the strength and rigidity of the mount. The mount will attach to both our Saturn Series and standard series kits, as well as other CNC machines with a standard 1in […]
This kit includes everything you need for smooth, powerful cnc motion control of your 3 axis machine! A perfect compliment to the mechanical components in our 2’ x 3’ router kit, this bundle features a set of components designed and tested to work together for great machine performance. Includes: 48V 7.3A switching power supply Gecko […]
These cables are specially designed for CNC applications, and are perfect for connecting our pre-configured motors to the Gecko G540. Standard DB9 cables use small conductors that are completely inappropriate for motor applications, as they are not rated to carry the required current, resulting in excessive heat and power-starved motors. A standard 30 AWG cable […]