This 15mm wide x 375mm long belt is a spare for our NEMA 34 rack and pinion drive. The belts on the system should last a while, but eventually will need replacing. This spare belt gives you peace of mind that the machine will be back up quickly if something goes wrong an a belt breaks […]
Our NEMA 34 Rack and Pinion drive spindles feature a ball bearing and needle roller bearing that ride on custom machined ground shaft (included). This combination results in smooth, precise motion even under heavy loads. The timing pulley is 64 teeth, which gives us a HUGE 3.2:1 reduction with our 20 tooth motor pulleys. They are compatible […]
2 flute, carbide tipped. Will plunge cut. 90° V-Groove bits are used for cutting full 90° V grooves, 45° chamfers or a 45° angle for an accurate mitre. Excellent for sign carving, lettering, grooving, etc. Degree: 90° Large Diameter (Inch): 1/4 Carbide Height (Inch): 3/8 Number of Flutes: 2 Material: Solid Carbide Shank Diameter (Inch): […]
1 or 2 flute, carbide tipped. Works well in soft or hard woods as well as composition materials. Can be used for reeding, fluting, veining, grooving and general ornamentation where a round bottom groove is desired. Large Diameter (Inch): 1/4 Carbide Height (Inch): 5/16 Number of Flutes: 2 Material: Solid Carbide Shank Diameter (Inch): 1/4 […]
New! For machines running 4 or more motors, this larger power supply provides the power you need. With 600W of available power, these supplies have more than enough to handle high-speed rapids and heavy cutting loads. Highly recommended for 4 motors setups, or any setup where high power and reliability are a must.
This kit includes everything you need for smooth, powerful cnc motion control of your 4 axis machine! The perfect setup for rack and pinion or other dual-drive machines, this bundle features a set of components designed and tested to work together for great machine performance. While the same components are available a la carte in […]
2 flute flat bottom cutters. Top quality HSS Onsrud cutters. Will cut faster, smoother and stays sharper longer. Produces a very clean, fast and accurate cut with minimal chatter. Upcut spiral helps remove material and will give a clean edge on the bottom of the cut. Ideal for soft & hard woods, plywoods & composites, […]
2 flute flat bottom cutters. Top quality HSS Onsrud cutters. Will cut faster, smoother and stays sharper longer. Produces a very clean, fast and accurate cut with minimal chatter. Downcut spirals help hold the material in place and give a nice clean edge at the top of the cut. Ideal for soft & hard woods, […]
This 1/4” to 1/2” coupler is perfect for adapting from our NEMA 23 stepper motors to 1/2” screws. With a compression fitting on both ends, it will clamp tight, but won’t mar the face of your motor shaft or damage your screw. With it’s helically milled grooves, this coupler is stiff in the rotary direction […]
No soldering required — these are plug and play! These motors are optimized to run with the Gecko G540 to get the maximum power out of this fantastic drive, and they come preconfigured with a DB9 connector with integral current-set resistor. Just plug them right into the drive, or if you need some more cable […]