New! For machines running 4 or more motors, this larger power supply provides the power you need. With 600W of available power, these supplies have more than enough to handle high-speed rapids and heavy cutting loads. Highly recommended for 4 motors setups, or any setup where high power and reliability are a must.
These cables are specially designed for CNC applications and are perfect for connecting our pre-configured motors to the Gecko G540. Standard DB9 cables use small conductors that are completely inappropriate for motor applications, as they are not rated to carry the required current, resulting in excessive heat and power-starved motors. A standard 30 AWG cable […]
We are proud to announce a cooperative effort with DumpsterCNC, bringing together Dumpster’s innovative and proven anti-backlash design with our own low profile mounting system. The unique spring mechanism on the nuts provides for miles of backlash-free linear travel, while the rugged aluminum housing secures the drive nut to your moving axis at a convenient […]
What’s Included The base kit comes in the following subsystems: Table Assembly (FLA110-00) Gantry Assembly (FLA120-00) Z-Axis Gantry Assembly (FLA130-00) Z-Axis Assembly (FLA140-00) The kit includes: Aluminum Extrusion, drilled and tapped for easy assembly Pre-Drilled cold rolled steel rails for X, Y, and Z Linear Motion Components Drive components (screws, bearing blocks, couplers, etc.) All […]
This 1/4” to 1/2” coupler is perfect for adapting from our NEMA 23 stepper motors to 1/2” screws. With a compression fitting on both ends, it will clamp tight, but won’t mar the face of your motor shaft or damage your screw. With it’s helically milled grooves, this coupler is stiff in the rotary direction […]
No soldering required — these are plug and play! These motors are optimized to run with the Gecko G540 to get the maximum power out of this fantastic drive, and they come preconfigured with a DB9 connector with integral current-set resistor. Just plug them right into the drive, or if you need some more cable […]
These cables are specially designed for CNC applications, and are perfect for connecting our pre-configured motors to the Gecko G540. Standard DB9 cables use small conductors that are completely inappropriate for motor applications, as they are not rated to carry the required current, resulting in excessive heat and power-starved motors. A standard 30 AWG cable […]
This motor mount from CNCRouterParts.com is designed to accept any NEMA 23 motor. The mount is designed to work with the bearing blocks offered on this site. The aluminum construction offers a rigid mounting point for your motors that is aligned with the leadscrew shaft of the axis. The mount attaches directly to the end […]
The Saturn Series routers have been out for a while now and we have had the chance to really evaluate some customer feedback on the machines. There were a few things that we heard time and again from customers that they would like improved. Topping the list were: Customers wanted better proximity switch placement that: […]
Made From FLA Machines is a series dedicated to showcasing just what can be done with our CNC Routers. Our customers build all sorts of cool things and we want to show the world. If you have one of our machines and are building cool things, we want to see them. Send us pictures or […]