4-Axis NEMA 34 Plug And Play System

Click a Picture to Zoom

Crp800 n34 full kit
Crp800 n34 gland plate 800
Crp800 n34 interior 800

4-Axis NEMA 34 Plug And Play System

Product Code:
EL-0014
Availability:
In Stock

Product Rating:
0 reviews

$2,575.00

Our latest pre-wired NEMA 34 electronics system offers a rugged, industrial control solution with power to move our largest motors, and enough IO to support a number of different accessories. This system features all-digital stepper drivers, which provide significantly lower motor temperatures and motor noise, along with anti-resonance and ripple smoothing technology for exceptionally precise motion.  

Professionally assembled and tested, this control unit is ready for plug and play operation. It is built in an industrial steel NEMA rated enclosure, complete with power entry connection, motor ports, powered industrial M12 signal ports, a remote e-stop, auxiliary AC outlets for router and dust collector, and a port for optional spindle control.
 
Package features include:
  • Industrial steel NEMA Enclosure
  • (4) All digital CRP8070 drivers pre-wired to power terminals, motor plugs, and logic board. 
  • CRP550 "bridge" board that plugs directly into 4 motor drivers, and leaves room for a 5th axis drive.
  • CRP560 panel-mounted IO breakout board, featuring (3) 15A relays, (8) 12V powered M12 ports for home switches or general input signals (proximity switches sold separately), and on-board 0-10V analog output for spindle speed control.
  • (2) 600W 48V regulated power supplies with enough power for up to 5 NEMA 34 motors, allowing for the addition of a 5th axis in the future for rotary applications.
  • High quality 5V and 12V regulated power supplies for logic and sensor power. 
  • (4) 7A rated plug and play motor terminals.
  • (4) Powerful low inductance 960 oz-in NEMA 34 motors with 1/2" shafts.
  • High flex 7A motor cables in various length configurations (choose below) to fit your machine. (2) 20' and (2) 12' high current motor cables are perfect for a 4'x4' application, while (2) 20' and (3) 12' fit a 4'x8' machine. You will connect two of the 12' cables to make a 24' cable for your Z axis in a 4'x8' application. Need more length? Our cables are designed to plug together, so add additional cables as needed to get the length you need for your larger format machine.
  • 2 AC power cables, one for the main control unit and one for auxiliary input power for a router or dust collector.
  • Plug-in E-Stop unit.
  • Ethernet Smoothstepper - included standard for expanded I/O, faster processing speed, and better comparability with modern computers/operating-systems! 
 
Available Upgrades:
 
Please note that many large format CNC machines, including all of our Standard Machine Kits, employ a dual-drive gantry system, and thus require a 4-axis electronics package. A 5th-Axis upgrade for this system is available to enable control of an additional independent axis (such as a rotary positioner, additional Z-axis, etc.). This upgrade contains an extra driver and all of the internal wiring for a 5th axis, but does not include a 5th motor or cable.
 
Documentation
 
This system is ready for plug and play operation with Mach 3 using our Mach 3 XML Configuration Files.

No reviews have been written for this product.

  • Description
    Our latest pre-wired NEMA 34 electronics system offers a rugged, industrial control solution with power to move our largest motors, and enough IO to support a number of different accessories. This system features all-digital stepper drivers, which provide significantly lower motor temperatures and motor noise, along with anti-resonance and ripple smoothing technology for exceptionally precise motion.  

    Professionally assembled and tested, this control unit is ready for plug and play operation. It is built in an industrial steel NEMA rated enclosure, complete with power entry connection, motor ports, powered industrial M12 signal ports, a remote e-stop, auxiliary AC outlets for router and dust collector, and a port for optional spindle control.
     
    Package features include:
    • Industrial steel NEMA Enclosure
    • (4) All digital CRP8070 drivers pre-wired to power terminals, motor plugs, and logic board. 
    • CRP550 "bridge" board that plugs directly into 4 motor drivers, and leaves room for a 5th axis drive.
    • CRP560 panel-mounted IO breakout board, featuring (3) 15A relays, (8) 12V powered M12 ports for home switches or general input signals (proximity switches sold separately), and on-board 0-10V analog output for spindle speed control.
    • (2) 600W 48V regulated power supplies with enough power for up to 5 NEMA 34 motors, allowing for the addition of a 5th axis in the future for rotary applications.
    • High quality 5V and 12V regulated power supplies for logic and sensor power. 
    • (4) 7A rated plug and play motor terminals.
    • (4) Powerful low inductance 960 oz-in NEMA 34 motors with 1/2" shafts.
    • High flex 7A motor cables in various length configurations (choose below) to fit your machine. (2) 20' and (2) 12' high current motor cables are perfect for a 4'x4' application, while (2) 20' and (3) 12' fit a 4'x8' machine. You will connect two of the 12' cables to make a 24' cable for your Z axis in a 4'x8' application. Need more length? Our cables are designed to plug together, so add additional cables as needed to get the length you need for your larger format machine.
    • 2 AC power cables, one for the main control unit and one for auxiliary input power for a router or dust collector.
    • Plug-in E-Stop unit.
    • Ethernet Smoothstepper - included standard for expanded I/O, faster processing speed, and better comparability with modern computers/operating-systems! 
     
    Available Upgrades:
     
    Please note that many large format CNC machines, including all of our Standard Machine Kits, employ a dual-drive gantry system, and thus require a 4-axis electronics package. A 5th-Axis upgrade for this system is available to enable control of an additional independent axis (such as a rotary positioner, additional Z-axis, etc.). This upgrade contains an extra driver and all of the internal wiring for a 5th axis, but does not include a 5th motor or cable.
     
    Documentation
     
    This system is ready for plug and play operation with Mach 3 using our Mach 3 XML Configuration Files.
  • Reviews

    No reviews have been written for this product.