4 in. Wide Rail - 10 in. Long FLA105-01

This rail is designed specifically to be used a short machine axis. On most machines this is the Z-Axis, which we define as the vertical axis the router is mounted to. This rails can also be used in a small machine for all axis.

This rail provides a 6” cutting length. These sizes are based on using the rails with the Standard Linear Carriages from CNCRouterParts.com.

The rail is 4” wide, 1/4” in depth, and made of 1018 cold rolled steel flat stock. There is no finish on the rails, so it is recommended they get a light coating of oil from time to time.