Click On Image To Enlarge

The perfect companion to our Rack and Pinion Drive System, these clamps ride in the t-slot of 1530 or 3030 and allow you to clamp your rack in place, no machining required! We recommend clamping the rack to the extrusion every 16” to 20”. and at either end of your rack. The clamps feature a boss that fits tightly in the t-slot, making setup and alignment of the rack a snap.

These components are also very helpful for accurately joining two pieces of rack together for longer travels. In this case, you will need to insure the rack ends continue the rack pitch smoothly. This is best accomplished with a metal file and another piece of rack meshed with the adjoining pieces to set the pitch.

Each rack clamps comes with 5/16-18 carriage bolts and hex nuts to make a strong connection to the extrusion.

CAD Files:

• PDF File
• DXF File
• Sketchup File
• IGES File
• STEP File